Interfacial Triboelectricity Lights Up Phosphor-Polymer Elastic Composites: Unraveling the Mechanism of Mechanoluminescence in Zinc Sulfide Microparticle-Embedded Polydimethylsiloxane Films.

Composites comprising copper-doped zinc sulfide phosphor microparticles embedded in polydimethylsiloxane (ZnS:Cu-PDMS) have received significant attention over the past decade because of their bright and durable mechanoluminescence (ML); however, the underlying mechanism of this unique ML remains unclear. This study reports empirical and theoretical findings that confirm this ML is an electroluminescence (EL) of the ZnS:Cu phosphor induced by the triboelectricity generated at the ZnS:Cu microparticle-PDMS matrix interface. ZnS:Cu microparticles that exhibit bright ML are coated with alumina, an oxide with strong positive triboelectric properties; the contact separation between this oxide coating and PDMS, a polymer with strong negative triboelectric properties, produces sufficient interfacial triboelectricity to induce EL in ZnS:Cu microparticles. The ML of ZnS:Cu-PDMS composites varies on changing the coating material, exhibiting an intensity that is proportional to the amount of interfacial triboelectricity generated in the system. Finally, based on these findings, a mechanism that explains the ML of phosphor-polymer elastic composites (interfacial triboelectric field-driven alternating-current EL model) is proposed in this study. It is believed that understanding this mechanism will enable the development of new materials (beyond ZnS:Cu-PDMS systems) with bright and durable ML.

Recent Advances in Triboelectric Nanogenerators: From Technological Progress to Commercial Applications.

Serious climate changes and energy-related environmental problems are currently critical issues in the world. In order to reduce carbon emissions and save our environment, renewable energy harvesting technologies will serve as a key solution in the near future. Among them, triboelectric nanogenerators (TENGs), which is one of the most promising mechanical energy harvesters by means of contact electrification phenomenon, are explosively developing due to abundant wasting mechanical energy sources and a number of superior advantages in a wide availability and selection of materials, relatively simple device configurations, and low-cost processing. Significant experimental and theoretical efforts have been achieved toward understanding fundamental behaviors and a wide range of demonstrations since its report in 2012. As a result, considerable technological advancement has been exhibited and it advances the timeline of achievement in the proposed roadmap. Now, the technology has reached the stage of prototype development with verification of performance beyond the lab scale environment toward its commercialization. In this review, distinguished authors in the world worked together to summarize the state of the art in theory, materials, devices, systems, circuits, and applications in TENG fields. The great research achievements of researchers in this field around the world over the past decade are expected to play a major role in coming to fruition of unexpectedly accelerated technological advances over the next decade.

Control of the Biodegradability of Piezoelectric Peptide Nanotubes Integrated with Hydrophobic Porphyrin.

Diphenylalanine (FF) is a piezoelectric material that is widely known for its high piezoelectric constant, self-assembly characteristics, and ease of manufacture. Because of its biocompatible nature, it is useful for implantable applications. However, its use in real applications is challenging because it degrades too easily in the body due to its solubility in water (0.76 g/mL). Upon incorporation of hydrophobic and biocompatible porphyrins into the FF, the degradability of the piezoelectric FF and their piezoelectric nanogenerators (PENGs) is controlled. Porphyrin-incorporated FFs are also formed as piezoelectric nanostructures well aligned on the substrate through self-assembly, and their piezoelectric properties are comparable to those of FF. The FF-based PENG degrades in only 5 min, whereas the FF-porphyrin-based PENG produces a stable output for >15 min in phosphate-buffered saline. This strategy for realizing biodegradable functional materials and devices with tunable degradation rates in the body can be applied to many implantable electronics.

Plasticized PVC-Gel Single Layer-Based Stretchable Triboelectric Nanogenerator for Harvesting Mechanical Energy and Tactile Sensing.

Triboelectric nanogenerators have garnered significant attention as alternative power sources for wearable electronics owing to their simple structure, easy fabrication, low cost, and superior power output. In this study, a transparent, stretchable, and attachable triboelectric nanogenerator (TENG) is built with an advanced power output using plasticized polyvinyl chloride (PVC)-gel. The PVC-gel exhibit very high negative triboelectric properties and electrically insulating PVC became an electrically active material. It is found that a single layer of PVC-gel can act as a dielectric and as a conducting layer. The PVC-gel based single layer of triboelectric nanogenerator (S-TENG) creates output signals of 24.7 V and 0.83 µA, i.e., a 20-fold enhancement in the output power compared to pristine PVC-based TENGs. In addition, the S-TENG can stably generate output voltage and current under stretching condition (80%). The S-TENG can be implemented as a tactile sensor that can sense position and pressure without combining multiple elements or electrode grid patterns. This study provides new applications of power sources and tactile sensors in wearable electronics.

M13 Virus Triboelectricity and Energy Harvesting.

Triboelectrification is a phenomenon that generates electric potential upon contact. Here, we report a viral particle capable of generating triboelectric potential. M13 bacteriophage is exploited to fabricate precisely defined chemical and physical structures. By genetically engineering the charged structures, we observe that more negatively charged phages can generate higher triboelectric potentials and can diffuse the electric charges faster than less negatively charged phages can. The computational results show that the glutamate-engineered phages lower the LUMO energy level so that they can easily accept electrons from other materials upon contact. A phage-based triboelectric nanogenerator is fabricated and it could produce ∼76 V and ∼5.1 µA, enough to power 30 light-emitting diodes upon a mechanical force application. Our biotechnological approach will be useful to understand the electrical behavior of biomaterials, harvest mechanical energy, and provide a novel modality to detect desired viruses in the future.

Patchable and Implantable 2D Nanogenerator.

With the development of technology, electronic devices are becoming more miniaturized and multifunctional. With the development of small electronic devices, they are changing from the conventional accessory type, which is portable, to the patchable type, which can be attached to a person's apparel or body, and the eatable/implantable type, which can be directly implanted into the human body. In this regard, it is necessary to address various technical issues, such as high-capacity/high-efficiency small-sized battery technology, component miniaturization, low power technology, flexible technology, and smart sensing technology. In addition, there is a demand for self-powered wireless systems in particular devices. A piezoelectric/triboelectric nanogenerator (PENG/TENG) can generate electric energy from small amounts of mechanical energy such as from blood flow and heartbeats in the human body as well as human movement, so it is expected that it will enable the development of self-powered wireless systems. Due to their unique properties, such as flexibility, transparency, mechanical stability, and nontoxicity, 2D materials are optimal materials for the development of implantable and patchable self-powered nanodevices in the human body. In this Review, the studies related to patchable and implantable devices for the human body using PENGs/TENGs based on 2D materials are discussed.

Biomolecular Piezoelectric Materials: From Amino Acids to Living Tissues.

Biomolecular piezoelectric materials are considered a strong candidate material for biomedical applications due to their robust piezoelectricity, biocompatibility, and low dielectric property. The electric field has been found to affect tissue development and regeneration, and the piezoelectric properties of biological materials in the human body are known to provide electric fields by pressure. Therefore, great attention has been paid to the understanding of piezoelectricity in biological tissues and its building blocks. The aim herein is to describe the principle of piezoelectricity in biological materials from the very basic building blocks (i.e., amino acids, peptides, proteins, etc.) to highly organized tissues (i.e., bones, skin, etc.). Research progress on the piezoelectricity within various biological materials is summarized, including amino acids, peptides, proteins, and tissues. The mechanisms and origin of piezoelectricity within various biological materials are also covered.

Vertical Self-Assembly of Polarized Phage Nanostructure for Energy Harvesting.

Controlling the shape, geometry, density, and orientation of nanomaterials is critical to fabricate functional devices. However, there is limited control over the morphological and directional characteristics of presynthesized nanomaterials, which makes them unsuitable for developing devices for practical applications. Here, we address this challenge by demonstrating vertically aligned and polarized piezoelectric nanostructures from presynthesized biological piezoelectric nanofibers, M13 phage, with control over the orientation, polarization direction, microstructure morphology, and density using genetic engineering and template-assisted self-assembly process. The resulting vertically ordered structures exhibit strong unidirectional polarization with three times higher piezoelectric constant values than that of in-plane aligned structures, supported by second harmonic generation and piezoelectric force microscopy measurements. The resulting vertically self-assembled phage-based piezoelectric energy harvester (PEH) produces up to 2.8 V of potential, 120 nA of current, and 236 nW of power upon 17 N of force. In addition, five phage-based PEH integrated devices produce an output voltage of 12 V and an output current of 300 nA, simply by pressing with a finger. The resulting device can operate light-emitting diode backlights on a liquid crystal display. Our approach will be useful for assembling many other presynthesized nanomaterials into high-performance devices for various applications.

Bacteriophage nanofiber fabrication using near field electrospinning.

M13 bacteriophage (phage) nano- and microfibers were fabricated using electrospinning. Using liquid crystalline suspension of the phage, we successfully fabricated nano- and microscale pure phage fibers. Through a near field electrospinning process, we fabricated the desired phage fiber pattern with tunable direction and spacing. In addition, we demonstrated that the resulting phage fibers could be utilized as an electrostatic-stimulus responsive actuator. The near field electrospinning would be a very useful tool to design phage-based chemical sensors, tissue regenerative materials, energy generators, metallic and semiconductor nanowires in the future.

Diphenylalanine Peptide Nanotube Energy Harvesters.

Piezoelectric materials are excellent generators of clean energy, as they can harvest the ubiquitous vibrational and mechanical forces. We developed large-scale unidirectionally polarized, aligned diphenylalanine (FF) nanotubes and fabricated peptide-based piezoelectric energy harvesters. We first used the meniscus-driven self-assembly process to fabricate horizontally aligned FF nanotubes. The FF nanotubes exhibit piezoelectric properties as well as unidirectional polarization. In addition, the asymmetric shapes of the self-assembled FF nanotubes enable them to effectively translate external axial forces into shear deformation to generate electrical energy. The fabricated peptide-based piezoelectric energy harvesters can generate voltage, current, and power of up to 2.8 V, 37.4 nA, and 8.2 nW, respectively, with 42 N of force, and can power multiple liquid-crystal display panels. These peptide-based energy-harvesting materials will provide a compatible energy source for biomedical applications in the future.

Point-Defect-Passivated MoS2 Nanosheet-Based High Performance Piezoelectric Nanogenerator.

In this work, a sulfur (S) vacancy passivated monolayer MoS2 piezoelectric nanogenerator (PNG) is demonstrated, and its properties before and after S treatment are compared to investigate the effect of passivating S vacancy. The S vacancies are effectively passivated by using the S treatment process on the pristine MoS2 surface. The S vacancy site has a tendency to covalently bond with S functional groups; therefore, by capturing free electrons, a S atom will form a chemisorbed bond with the S vacancy site of MoS2 . S treatment reduces the charge-carrier density of the monolayer MoS2 surface, thus the screening effect of piezoelectric polarization charges by free carrier is significantly prevented. As a result, the output peak current and voltage of the S-treated monolayer MoS2 nanosheet PNG are increased by more than 3 times (100 pA) and 2 times (22 mV), respectively. Further, the S treatment increases the maximum power by almost 10 times. The results suggest that S treatment can reduce free-charge carrier by sulfur S passivation and efficiently prevent the screening effect. Thus, the piezoelectric output peaks of current, voltage, and maximum power are dramatically increased, as compared with the pristine MoS2 .

Reliable Piezoelectricity in Bilayer WSe2 for Piezoelectric Nanogenerators.

Recently, piezoelectricity has been observed in 2D atomically thin materials, such as hexagonal-boron nitride, graphene, and transition metal dichalcogenides (TMDs). Specifically, exfoliated monolayer MoS2 exhibits a high piezoelectricity that is comparable to that of traditional piezoelectric materials. However, monolayer TMD materials are not regarded as suitable for actual piezoelectric devices due to their insufficient mechanical durability for sustained operation while Bernal-stacked bilayer TMD materials lose noncentrosymmetry and consequently piezoelectricity. Here, it is shown that WSe2 bilayers fabricated via turbostratic stacking have reliable piezoelectric properties that cannot be obtained from a mechanically exfoliated WSe2 bilayer with Bernal stacking. Turbostratic stacking refers to the transfer of each chemical vapor deposition (CVD)-grown WSe2 monolayer to allow for an increase in degrees of freedom in the bilayer symmetry, leading to noncentrosymmetry in the bilayers. In contrast, CVD-grown WSe2 bilayers exhibit very weak piezoelectricity because of the energetics and crystallographic orientation. The flexible piezoelectric WSe2 bilayers exhibit a prominent mechanical durability of up to 0.95% of strain as well as reliable energy harvesting performance, which is adequate to drive a small liquid crystal display without external energy sources, in contrast to monolayer WSe2 for which the device performance becomes degraded above a strain of 0.63%.

Control of Skin Potential by Triboelectrification with Ferroelectric Polymers.

Negatively polarized ferroelectric polymer ß-P(VDF-TrFE) shows higher positive triboelectric properties than skin, which could lead to new medical applications. Kelvin force microscope measurements and triboelectric nanogenerator characterizations are performed to demonstrate this new property. In addition, how many negative charges are exchanged by contact electrification between the negatively polarized ß-P(VDF-TrFE) and the skin is estimated.

Transparent Stretchable Self-Powered Patchable Sensor Platform with Ultrasensitive Recognition of Human Activities.

Monitoring of human activities can provide clinically relevant information pertaining to disease diagnostics, preventive medicine, care for patients with chronic diseases, rehabilitation, and prosthetics. The recognition of strains on human skin, induced by subtle movements of muscles in the internal organs, such as the esophagus and trachea, and the motion of joints, was demonstrated using a self-powered patchable strain sensor platform, composed on multifunctional nanocomposites of low-density silver nanowires with a conductive elastomer of poly(3,4-ethylenedioxythiophene):polystyrenesulfonate/polyurethane, with high sensitivity, stretchability, and optical transparency. The ultra-low-power consumption of the sensor, integrated with both a supercapacitor and a triboelectric nanogenerator into a single transparent stretchable platform based on the same nanocomposites, results in a self-powered monitoring system for skin strain. The capability of the sensor to recognize a wide range of strain on skin has the potential for use in new areas of invisible stretchable electronics for human monitoring. A new type of transparent, stretchable, and ultrasensitive strain sensor based on a AgNW/PEDOT:PSS/PU nanocomposite was developed. The concept of a self-powered patchable sensor system integrated with a supercapacitor and a triboelectric nanogenerator that can be used universally as an autonomous invisible sensor system was used to detect the wide range of strain on human skin.

Nanopatterned textile-based wearable triboelectric nanogenerator.

Here we report a fully flexible, foldable nanopatterned wearable triboelectric nanogenerator (WTNG) with high power-generating performance and mechanical robustness. Both a silver (Ag)-coated textile and polydimethylsiloxane (PDMS) nanopatterns based on ZnO nanorod arrays on a Ag-coated textile template were used as active triboelectric materials. A high output voltage and current of about 120 V and 65 µA, respectively, were observed from a nanopatterned PDMS-based WTNG, while an output voltage and current of 30 V and 20 µA were obtained by the non-nanopatterned flat PDMS-based WTNG under the same compressive force of 10 kgf. Furthermore, very high voltage and current outputs with an average value of 170 V and 120 µA, respectively, were obtained from a four-layer-stacked WTNG under the same compressive force. Notably it was found there are no significant differences in the output voltages measured from the multilayer-stacked WTNG over 12 000 cycles, confirming the excellent mechanical durability of WTNGs. Finally, we successfully demonstrated the self-powered operation of light-emitting diodes, a liquid crystal display, and a keyless vehicle entry system only with the output power of our WTNG without any help of external power sources.

Hydrophobic sponge structure-based triboelectric nanogenerator.

Hydrophobic sponge structure-based triboelectric nanogenerators using an inverse opal structured film for sustainable energy harvesting over a wide range of humid atmosphere have been successfully demonstrated. The output voltage and current density reach a record value of 130 V and 0.10 mA cm(-2) , respectively, giving over 10-fold power enhancement, compared with the flat film-based triboelectric nanogenerator.

Highly stretchable piezoelectric-pyroelectric hybrid nanogenerator.

A highly stretchable hybrid nanogenerator has been developed using a micro-patterned piezoelectric polymer P(VDF-TrFE), PDMS-CNT composite, and graphene nanosheets. Mechanical and thermal energies are simultaneously harvested from a single cell of the device. The hybrid nanogenerator exhibits high robustness behavior even after 30% stretching and generates very stable piezoelectric and pyroelectric power outputs due to micro-pattern designing.

Two-dimensional vanadium-doped ZnO nanosheet-based flexible direct current nanogenerator.

Here, we report the synthesis of lead-free single-crystalline two-dimensional (2D) vanadium(V)-doped ZnO nanosheets (NSs) and their application for high-performance flexible direct current (DC) power piezoelectric nanogenerators (NGs). The vertically aligned ZnO nanorods (NRs) converted to NS networks by V doping. Piezoresponse force microscopy studies reveal that vertical V-doped ZnO NS exhibit typical ferroelectricity with clear phase loops, butterfly, and well-defined hysteresis loops with a piezoelectric charge coefficient of up to 4 pm/V, even in 2D nanostructures. From pristine ZnO NR-based NGs, alternating current (AC)-type output current was observed, while from V-doped ZnO NS-based NGs, a DC-type output current density of up to 1.0 µAcm(-2) was surprisingly obtained under the same vertical compressive force. The growth mechanism, ferroelectric behavior, charge inverted phenomena, and high piezoelectric output performance observed from the V-doped ZnO NS are discussed in terms of the formation of an ionic layer of [V(OH)4(-)], permanent electric dipole, and the doping-induced resistive behavior of ZnO NS.

Coaxial fiber supercapacitor using all-carbon material electrodes.

We report a coaxial fiber supercapacitor, which consists of carbon microfiber bundles coated with multiwalled carbon nanotubes as a core electrode and carbon nanofiber paper as an outer electrode. The ratio of electrode volumes was determined by a half-cell test of each electrode. The capacitance reached 6.3 mF cm(-1) (86.8 mF cm(-2)) at a core electrode diameter of 230 µm and the measured energy density was 0.7 µWh cm(-1) (9.8 µWh cm(-2)) at a power density of 13.7 µW cm(-1) (189.4 µW cm(-2)), which were much higher than the previous reports. The change in the cyclic voltammetry characteristics was negligible at 180° bending, with excellent cycling performance. The high capacitance, high energy density, and power density of the coaxial fiber supercapacitor are attributed to not only high effective surface area due to its coaxial structure and bundle of the core electrode, but also all-carbon materials electrodes which have high conductivity. Our coaxial fiber supercapacitor can promote the development of textile electronics in near future.

Piezoelectric two-dimensional nanosheets/anionic layer heterojunction for efficient direct current power generation.

Direct current (DC) piezoelectric power generator is promising for the miniaturization of a power package and self-powering of nanorobots and body-implanted devices. Hence, we report the first use of two-dimensional (2D) zinc oxide (ZnO) nanostructure and an anionic nanoclay layer to generate piezoelectric DC output power. The device, made from 2D nanosheets and an anionic nanoclay layer heterojunction, has potential to be the smallest size power package, and could be used to charge wireless nano/micro scale systems without the use of rectifier circuits to convert alternating current into DC to store the generated power. The combined effect of buckling behaviour of the ZnO nanosheets, a self-formed anionic nanoclay layer, and coupled semiconducting and piezoelectric properties of ZnO nanosheets contributes to efficient DC power generation. The networked ZnO nanosheets proved to be structurally stable under huge external mechanical loads.